Installation Instructions

Wolf-Lighting LED String Module Kit Installation Instructions A typical kit will include LEDs, a wall adapter, and a control. Also¬†8 self adhesive wire holder clips (see picture below), and a white spring connector (order extras if needed). The example below shows a kit with an RF Remote Control. The remote control “receiver” is shown in […]

Posted in Instructions | Leave a comment

Installing LED string lighting under shelves

When installing LED strings on china cabinets, it can be helpful to block the direct glare of the LEDs using corner-round from your local hardware store. Use mounting foam tape to install the corner round in front of the LED modules. This hides the wires as well as the glare. See pictures here… As for […]

Posted in Instructions | Leave a comment

Attaching modules to difficult surfaces

The 3M self adhesive foam mounting tape on these HCI-LED modules is excellent. In fact, when commercial sign companies use these modules to backlight outdoor channel letters and other signage, they don’t use screws but trust the 3M adhesive to hold the modules in place permanently, and that’s across wide temperature swings. Of course, those […]

Posted in Instructions | Leave a comment

Wiring Instructions (for more than 20 LED modules)

You can power up to 20 HCI-LED modules in a row. For longer strings, the modules beyond 20 will need their own direct connection back to the power supply as shown in this diagram: 12 gauge high purity high power copper speaker wire is usually best for runs greater than 5 feet. This prevents voltage […]

Posted in Instructions | Leave a comment

Powered by WordPress. Designed by WooThemes